BLTouch Holder, multiple lengths. Fits many printers. Two Trees Sapphire Pro / Plus (SP-3, SP-5)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The Two Trees SP-3 and SP-5 comes with mounting holes near the hotend that allows users to attach a BLTouch sensor. This requires you to print a small bracket to hold the sensor.
However, While the BLTouch sensor and clones all seem to have identical mounting holes, it seems they come in a number of length variance. This is problematic as they have pretty strict tolerances for mounting heights.
The sensor I got required to have a bracket with a length of 18mm from center of mounting hole to bottom of the bracket that held the sensor, and every model I found was at least 1 mm off.
Hence i have included various lengths from 13-20mm. I believe the most commonly used is 19mm. This should be your first try. 13-14mm is slightly thicker as it will else be close to fan on SP-3 and SP-5
Be aware, that you should aim at getting the sensor as far from the build plate, while still functioning, if it is mounted too low, a bit of warping in your print might hit the probe and damage it. Better lift it a bit within tolerance.