Z-axis Mod with Hex Nuts for Sovol SV06 or SV06 Plus
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix because SV06 Plus T-nut did not fit the original and I didn't want to use heat inserts. Adds M2 hex nut slots.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 52
- Makes
- 1
- Views
- 505
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This remix adds M2 hex nut slots in the bottom. Using M2x12 or longer screws you can raise the lid to adjust fit and tightness of the z-coupler inside the frame.
I made this remix as my SV06 Plus' z-coupler did not fit inside the original and I did not have heat inserts handy.
I printed them oriented vertically with supports, 100% infill and 0.32 layer height, in PLA. PLA holds, probably be better with PETG, ABS etc.
If you remove lead screw bearings from frame-top you can get even better results.