K2 Plus Cartographer Mount and Shroud (REMIX)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
K2 Plus Cartographer Mount and Shroud (REMIX) remixed shroud to cover the Cartographer and added cable guide
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 393
- Makes
- 1
- Views
- 2,598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed the shroud to cover the Cartographer and added a simple cable guide for a USB cable with about 3.2 mm in diameter.
To use this shroud you also need the remixed Cartographer mount!
- I have left the mounting position of the Cartographer from the original model completely untouched.
- the bevel at the front has been changed to fit the cover and magnets
- the holes for the screw head are slightly bigger so you can also use socket head screws
print settings:
- upside down and custom tree support, like shown in the preview picture
- 0.2 mm layer height
- I printed it with 2 and alternate extra wall
- 15% rectilinear infill
!! You MUST use the SPACERS from the original model !! (included in the download)
(slip over the rails on the left and right side to ensure the carto doesn't run into the door)
BOM: as in the original model