Voron V0.2 V3D Daybreak NEO Mini LED Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is used to add V3D NEO Mini LEDs to the Voron V0.2 printer
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 213
- Wydruki
- 1
- Wyświetlenia
- 1860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a light bar mount for the Voron V0.2 (and probably the V0.1) for the V3D DayBreak NEO-Mini LED sticks. These mounts attached underneath the 1515 extrusions below the gantry and use the same M3 screws and nuts the rest of the printer uses for assembly.
Couple links for the LED stick
https://vector3d.co.uk/product/voron-daylight-on-a-stick-v3d-daybreak-neo-mini/
https://www.fabreeko.com/products/daybreak-daybreak-neo-rgb?variant=43341711737087
https://www.3djake.com/vector3d/daybreak-neo?sai=14025
You will also need to modify your acrylic back plate to allow for the mounts to fit and route the wiring. I have included an updated .dxf file for the back-panel with the appropriate notches for the mounts
This model can be printed without supports, but you will likely need to re-orient it to the print surface so that the Voron logo is facing down into the build plate.