1 / 3
Buck Converter (LM2596) Enclosure (v2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another (this time non weather proof) enclosure for a LM2596 buck converter (DC/DC step down).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure for a LM2596 (or similar) buck converter which I use to step down voltage for DC applications. This is a simpler design from a previous weather proof version.
Hardware
- 2 x M2.5 6mm screws (for fixing both the module and the cap)
- 2 x M2.5 threaded inserts
Assembly
- Using the tip of a soldering iron, place the 2 threaded inserts in their holes
- Solder leads to your LM2596 module as needed
- Put the LM2596 module in place with the M2.5 screws
- Place the cap on and snap it closed
Printing
No supports. I personally used PETG with 0.3mm layer height and a 0.6mm nozzle.
Attributions
The cut out for the cover icon is called Electricity and is by misnaliningsih from Noun Project.