1 / 3
Buck Converter (LM2596) Enclosure (v2)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Another (this time non weather proof) enclosure for a LM2596 buck converter (DC/DC step down).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 0
- Views
- 321
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an enclosure for a LM2596 (or similar) buck converter which I use to step down voltage for DC applications. This is a simpler design from a previous weather proof version.
Hardware
- 2 x M2.5 6mm screws (for fixing both the module and the cap)
- 2 x M2.5 threaded inserts
Assembly
- Using the tip of a soldering iron, place the 2 threaded inserts in their holes
- Solder leads to your LM2596 module as needed
- Put the LM2596 module in place with the M2.5 screws
- Place the cap on and snap it closed
Printing
No supports. I personally used PETG with 0.3mm layer height and a 0.6mm nozzle.
Attributions
The cut out for the cover icon is called Electricity and is by misnaliningsih from Noun Project.