Lock Clip for Helmet Abus hs-11 Aduro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My son lost the clip for his bicycle helmet. Replacement was hard to find and expensive with shipping.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 728
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
My son lost the clip for his bicycle helmet. Replacement was hard to find and expensive with shipping. So I quickly designed a replacement. Not streamlinded at all, so also no .blend file this time. I bet you can come up with a better design.
Printed in PETG. I have no doubt it will perform like the real one feels very good in place.
Print instructions
Licence: Creative Commons - Attribution Category: Outdoor & Garden Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.15x0.4mm
Infill: Cubic 30%
Filament: Das Filament PETG PETG black
Notes:
There is a bridge in that part but its so short every printer halfway dialed in should do it without sagging.
Post-Printing
Light sanding for comfort and get rid of some sharp corners.