Peg Hooks for Metal/Steel Pegboards - Metric and Imperial
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Works with both metric (25 x 25 x 6mm) and imperial (25.4 x 25.4 x 6.35mm) pegboards.
- Ocena
- 4,857 / 5
- Polubienia
- 92
- Pobrania
- 603
- Wydruki
- 8
- Wyświetlenia
- 1553
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
So I only have metal pegboards - some are metric (25 x 25 x 6mm) and some are imperial (25.4 x 25.4 x 6.35mm). The pegs I got from the hardware store were horrible - sometimes they didn't stay in when taking the tools out and wobbled around a lot - no fun to use.
So I designed these to work with both metric and imperial pegboards. I went through at least 10 iterations to get to this, hope you enjoy, they will clip into place with a satisfying click.
Sugest printing with PETG/ASA/ABS - at least 1mm of walls/top/bottom, 40% triangular infill.