IKEA LACK Leg Extender 5mm to 155mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
IKEA LACK Leg Extender with various sizes
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 333
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I was looking for a way to rise my printer, I have a lack enclosure that sits on top of another lack table but the printer was to low for me to work on it so I made these extenders.
I personally use the 155mm extender on top of some rubberized surface so it doesn't slip. Until now I have no problem with it! If you need a custom length let me know.
ATTENTION:
To save on filament and make a sturdy part I recommend:
Infill 5% Gyroid BUT
Do minimum of 4 Walls/Perimeters
and do a minimum of 10 Top and Bottom Layers so it has the strength to hold the weight and you don't waste to much filament.