Magnetic Bambu Poop Chute using (QTY4) 8mmx3mm disc magnets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix model giving it a bit more height and uses pressed in magnets. no glue on the magnets.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 334
- Wydruki
- 5
- Wyświetlenia
- 1347
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall.
This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow grease and a flat surface.
0.28 mm layer height default settings but with 2 layers on top and bottom, 2 wall loops
no supports
no brim on the textured PEI sheet
standard Bambu speed
need 4 magnets that are 8mm diameter, 3mm thick
https://www.amazon.com/gp/product/B07B3SDRCP