SD Card spacer for Prusa printer card removed problem
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SD card spacer to fix intermittent "card removed" problem on Prusa i3 printer during a print
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
On my Prusa i3 MK3S prints were intermittently failing during a print, reporting that the SD card had been removed. This seemed to be caused by the contacts in the printer not pressing firmly enough on the card and loosing contact with the vibration of the print. I designed this simple spacer to slide in behind the SD card, putting a small bit of additional pressure on the card, thus preventing the problem. I haven't had the issue since I started using the spacer.
Simply place the SD card on the spacer and insert them together.
If your printer has developed this problem, this quick 7 minute print will save you a lot of failed prints and frustration.
- No supports required
- Prints in 7 minutes
- PLA, PETG