1 / 6
Spektrum DX8 Monitor Mount — zdjęcie 1
1 / 6

Spektrum DX8 Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own.

Ocena
5 / 5
Polubienia
7
Pobrania
64
Wydruki
0
Wyświetlenia
653
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but it should fit most others.

I have also designed a mount for the Futaba T8J to do the same job, but its very different. https://www.thingiverse.com/thing:3219989

you will need 2x cable ties to secure it to the rear handle and the bolt to screw in to the monitor, these can easily be found on eBay.

Print instructions

Category: R/C Vehicles Summary

I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but it should fit most others.

I have also designed a mount for the Futaba T8J to do the same job, but its very different. https://www.thingiverse.com/thing:3219989

you will need 2x cable ties to secure it to the rear handle and the bolt to screw in to the monitor, these can easily be found on eBay.

Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: No

Supports: No

Resolution: 0.15

Infill: 20

Filament: Prusa Prusament PLA black

Tagi