82 modeli
*** If you like the file please make your “ like ”. Every mark helps me to get a free roll out of Prusa. Thanks…. *** Printed with regular PLA. Print with a raft to support the center column and supports touching build plate. I use them…
Supporting your receiver without glue Category: R/C Vehicles
Just a wall hanger to keep things organized. Print in PLA without supports.
Spektrum AR636 AR637T AR637 Mount
Wall mount for Spektrum SLT2 RC car transmitters, that come with lots of Arrma RC cars, e.g. Gorgon, Granite Mega, Fury, Vorteks, Grom series, ... Might also work with similar transmitters from other brands, but not tested. For mounting…
Frame Holder for a RC Spektrum Satellit You can glue the holder into the model The satellite is stuck in the frame Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 20…
Spektrum AR637T receiver support without glue Category: R/C Vehicles
This model came from here: https://www.thingiverse.com/thing:3164272 Printed in PETG with 0.2mm Quality and 15% infill. Support material is suggested. I have not tried printing without support material. “DX8” has been highlighted with a…
Fits the Spektrum AR631 Receiver, and possibly others. The mount should be printed small-side down, so that the lip that keeps the narrow side of the RX (the side with the antenna) from sliding through faces the bed. Supports are not…
I wanted to have a custom plate to have the outside of the Harbor Freight Apache 3800 hard case. More Soon designs soon to come of other brands if suggested. Please like and share your makes! Use 100% infill for best results. Printed in…
I really dislike the foam feel of RC car radios. I decided to design a replacement for the SLT3 used with my Arrma Typhon 3S. This part will fit any SLT3 transmitter, which comes on most all of Arrma's 3S line (Typhon, Granite, Senton,…
Gimbal protectors for the Spektrum iX14+. May also fit other iX models (not tested). Application: Place the gimbal protectors onto the gimbals from above. Print Settings: Printer: Creality K1 Nozzle: 0.4 mm Material: Creality Hyper PLA…
Für den ersten Bau Schritt werden die abgebildeten Teile benötigt. Zunächst wird Stufe 1c oben in Stufe 1b geschoben. Dann wird oben drauf die Stufe 1d geklebt. (bitte auf die Ausrichtung achten) jetzt noch einen der CD in die kerbe rein…
Yet another gimbal protector, this one for Spektrum DX18 transmitter. Simple, no frills, made to use as little plastic as possible. Print instructions Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 Infill: 0%…
I was really disappointed with the Spektrum DX8 Monitor mounts I have found, so I decided to design my own. I have designed this primarily for use with the Flysight Black Pearl monitor but it should fit most others. I have also designed a…
I wanted to fly these cool UMX planes and micro helicopters with my Jeti DS Transmitter. So I built a box to fit the Organge Module from HK (OrangeRX DSMX/DSM2/Devo 2.4Ghz Switchable Transmitter Module V2.0 JR/Turnigy/Taranis/Walkera…
This is an replacement battery holder for the DX6 transmitter. Instead of the four AA batteries two protected (longer) 18650 cells can be used. To build this design you also need the following: Battery Springs made of wire (I took mine…
Angled / Vertical Holders for LiPo Chargers from ISDT and Spektrum for a Tidy Desk Organization.
Wall mount for Spektrum SLT3 RC car transmitters, that come with lots of Arrma RC cars, e.g. Senton, Granite 223s, Kraton, Typhoon, Big Rock, Mojave, ... Will also work with Spektrum DX3 Smart transmitter, since it's the same shell as the…
This is a tray console for Spektrum RC Transmitter DX6, DX7, DX8. Transmitter gets fully fixed and can't fall out. The transmitter console can be placed either flat or upright without the transmitter touching the ground. Parts 1 & 2 are…
Spektrum AR8020T receiver and blue box support without glue Category: R/C Vehicles
Replacement trim tabs for your Spectrum DX6i transmitter.
This is a great way to keep your satellite in place during flight.
Spektrum Replacement Roller Menu Scroll Button with metal hex shaft for roller sensor. For DX6i, DX7S, DX8, DX9 transmitters. 0.12 mm layer 15-30 mm/s PETG 1.6 mm hex wrench Insert hex wrench into button side and protrude appropriate…
Slip in mount for the AR637T. The dual antenna can be routed to one of 4 holes each allowing you to easily achieve the require 90 degree between antennae requirement. The holes are sized for PTFE tubing. The FreeCAD 0.21.1 model file is…
Wall mount for Spektrum NX8(+) transmitter Will also work with Spektrum NX6 and NX10(+) transmitters, since it's the same shell as the NX8(+). Might also work with other Spektrum transmitters from the DX or IX series, but not tested.…
Printed with TPU.
Inspired by https://www.thingiverse.com/thing:740638 , but designed to replace the stick ends vs going on top of them. Dimensions for the threaded portion's diameter (3mm) taken from http://www.thingiverse.com/thing:1053117 . Print…
I have a big hand and the Transmitter Wheel is too small for my liking so i decided to make this with some extra Flexible material i had laying around. This is completely a novelty, not really essential to enjoy the hobby but i personally…
Spektrum 3S 800mAh Li-Po Holder for the Wet Biscuit
Have been using the IISI Cockpit V2 telemetry for RC plane flying for a while now with my Spektrum DX9 transmitter. While I was very happy with the hardware itself, so far, I've always had to attach the Cockpit to my Tx using velcro - not…
Using this in a project to add a DeWALT battery to my remote so I don't need to use screws to remove this cover. I probably should use this to create a sliding door as well, more people would want that I imagine. Category: R/C Vehicles
Spektrum led lamp with 12volt led assembled pieces with glue
Det her er det elektromagnetiske spektrum, som er blevet gjort mere visuelt. Perfekt model til både eksamener og undervisning. Husk at kommenter eller lignende, hvis du finder nogle problemer eller har spørgsmål. Jeg ville med glæde…
Needed a way to orgnize my batteries for my Losi mini LMT
The power push button on my DX6e radio broke and I had removed it. Power on/off was achieved via a pinky finger press on a PCB button (not an ideal situation). This solves that problem and provides a more factory appearance. Print…
On most of my multirotor builds i use a Naze32 (or similar sized) flight controller and a Spektrum (or Orange- / LemonRX) satellite as receiver. This is a simple way to mount your sat stacked above your FC. Bolt pattern is standard…
Simple transmitter wall mount! Edit(17.11.2015): I added a bigger surface, so you can also put your turnigy transmitter bag on this wallmount! This transmitter bag:…
For Spektrum DX3 to replace ageing foam wheel with 1/10 scale touring car tire Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: Yes Resolution: .2 Infill: 100 Filament: amazon PLA Gray Category: R/C…
I upgraded my Cascadia from an old Tamiya crystal radio to a Spektrum 6Ch one, and needed a shift gate to protect the truck's transmission. This was designed for a G3 DX6, but may fit other Spektrum transmittors. You'll need to adjust…
A customizable steering wheel replacement for the DX5R controller. Improve your experience by making the wheel fit your hand and your driving style. I recommend starting with 47mm and going from there.
Isar Aerospace erste deutsche orbitale Rakete 2stufig.
Here's a second thumb steer iteration. The 3MF has the inner body set as a modifier with zero top/bottom and honeycomb infill. Adjust as you like! I think I over did the adjustments from the first version. The geometry is ~ 35° downward…
solve the prpblem of antena protor is too long problem,make it more shorter and easily to be load in bags. i edited in the prusaslicer software.you'd better to use prusaslicer to open it then transfer it to other printer can be used format.
This holder clips into Spectrum's S100 Smart Charger side vents. Helps to organize the numerous adapters required to charge non-smart batteries. Holds on quite firmly.
I knocked up this little mount so I could attach a little Hawkeye Little Pilot 3.5" monitor onto my Spektrum DX6i transmitter. It has a stepped 3mm mount hole (so you can use small washers if required) and uses an M4 bolt and nut to clamp…
Very quick design i made for a Spektrum Satellite Receiver Mount to a ImmersionRC Vortex 250 Pro. Fixed with thin double side tape and a zip tie.
3D printed part i designed to fix two LED Boards and the Spektrum Satellite Rx to the Sky-Hero Anakin.
The Spektrum Logo from Danish Author Nanna Foss book series "Spektrum". The model is made with a small hole in the top, so it can be used as a key-chain or necklace. The test print in the picture is 5.5 cm tall, and painted with acrylic…
Extends the original holder so the sattelite can be mounted higher up. Use a zip tie to mount it on a ~5mm bar
Made a quick model in Tinkercad, so I could get this thing off my desk. Printed in PLA. Print on side and use supports for the holes if needed. I'm using double sided 3m wall hanger tape, but I added screw holes just in case.
Believe it or not I've had my Tx fall off the strap. This should add a new level of safety. To unhook from tx, just rotate part so that shackle pin can be slid up: Category: R/C Vehicles
I modified the original model which I found on Makerworld. There were many comments about it not fitting the controller so I measured mine and made the adjustments in Fusion. I also swapped out the peg mounts for some from another project…
Not too bad for a first iteration. I'm changing the geometry on the next one, but posting this here in case it's useful or inspiring for someone else! I made it two bodies with the intention of exposed infill. Unfortunately I worked over…
This is a slightly smaller and a little lighter case for the Spektrum Sky Remote ID Module (SPM9500). It provides protection for the PCB without any additional bulk as with the factory case. The weight savings is only ~1 gram from the…
this in the internal antenna mount for the Spektrum DX6i , Happy Printing
"waterproof" box for the spektrum sr315 receiver. The wires should fold over the top and flat down the front of the case. The Cover will pinch all of the wires. Add a bead of sealant below and above the wires where they fold over the box…
Made a quick model in Tinkercad, so I could get this thing off my desk. Printed in PLA. Print on side and use supports for the holes if needed. I'm using double sided 3m wall hanger tape, but I added screw holes just in case.
On most of my multirotor builds i use a Naze32 (or similar sized) flight controller and a Spektrum (or Orange- / LemonRX) satellite as receiver. This is a simple way to mount your sat stacked above your FC. Bolt pattern is standard…
Protector for gimbal sticks in TX Spektrum DX7. Very good to put your radio in backpack Category: Tool Holders & Boxes
If you want a break with your FPV Freerider training with TX Spektrum DX7 ... you need stand :) Print Settings Printer Brand: RepRap Printer: DIM200 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 - 0,4 Infill: 10% Notes: I made it…
Small enclosure for the Spektrum SLT3 3-Channel receiver. In the photo, I modified the lid for this specific build.
This is a tpu Boot for the Spektrum Sky remote id unit. This installs in your plane for easy switching from aircraft to aircraft. I made 2 versions, one normal' and one with a comment to the FAA. I was able to print this with no supports…
This mount was designed specifically for the Spektrum NX6 and fits perfectly on the IKEA Skådis pegboard system. It holds the transmitter securely on the wall without putting pressure on switches or gimbals – a clean and practical storage…
This small arm mounts your GoPro or other action camera to the bracket on the front of the Spektrum DX5 Rugged RC transmitter. Use 2 20mm M3 screws to reinforce and clamp the arm to your radio. Notes: Designed to print on its side. The…
A replacement handle for Spektrum NX6 transmitter radio using OEM screws. May fit other Spektrum NX transmitter radios, but that was not tested.
this in the internal antenna mount for the Spektrum DX6i , Happy Printing
I made this to help protect the screen on the Spektrum XBC-100, I normally store my Spektrum XBC-100 in my charger bag and noticed marks on the screen and I wanted to protect it. Plus I thought I could mount it on the wall if need be too.…
"waterproof" box for the spektrum sr315 receiver. The wires should fold over the top and flat down the front of the case. The Cover will pinch all of the wires. Add a bead of sealant below and above the wires where they fold over the box…
This is a knob for a Spektrum DX5C RC Controller steering wheel to make it easier to steer with your thumb. There are 2 versions, one with a leg 5mm wide and another with a leg 10mm wide. How I Designed This This was designed in Fusion…
I was using the FPV Monitor Mount designed by user @BigOrangeFish for a while with my Blackpearl monitor and a Spektrum DX6 radio. https://www.thingiverse.com/thing:2313180 This mount is very good and robust but uses a custom connection…
This incorporates a way to keep itself in place and not fall off, even upside down. Gently spread both clips when you put it on or take it off because the gimbal post thing can be rough. In the future I may make it so that the clip…
Very simple really The battery-door of my old trusted Spektrum DX3R-radio had a little lid broken of and did not held tightly anymore. I found another STL for a DX3 … but that radio did not havge the same dimentions, as I noticed after…
Very simple really The battery-door of my old trusted Spektrum DX3R-radio had a little lid broken of and did not held tightly anymore. I found another STL for a DX3 … but that radio did not have the same dimentions, as I noticed after…
Very simple really The battery-door of my old trusted Spektrum DX3R-radio had a little lid broken of and did not held tightly anymore. I found another STL for a DX3 … but that radio did not havge the same dimentions, as I noticed after…
The antenna on my old Spektrum DX3E broke off. I found a new antenna-top-part on thingiverse: … https://www.thingiverse.com/thing:2755370 But it seemed also the bottom-part, housing into the radio was somewhat damaged .. AND it was…
IC5 Battery Connector I have a Spektrum 3S Lipo. I has the Spektrum IC5 Battery Connector SPMXCA501 . The cover that protects the terminals broke, and I didn't want to unsolder the connector to replace it. I designed this cover to Snap…
I designed this mounting plate to install on my radio control helicopters. It allows me to move the Sky Remote ID device (developed and manufactured by Spektrum) between models without having to use velcro. I printed these with several…
I was having difficulty reaching the back of the Spektrum Power Safe Soft Switch to install the mounting nut. In the spot I wanted to install this switch I couldn't get it tight enough to keep it from vibrating loose. By installing it to…
