1 / 2
Spektrum AR637T Receiver Holder with Antenna Mount — zdjęcie 1
1 / 2

Spektrum AR637T Receiver Holder with Antenna Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for the AR637T Receiver with 3 axis holes (sized for PTFE tubing) for each antenna.

Ocena
0 / 5
Polubienia
1
Pobrania
36
Wydruki
0
Wyświetlenia
376
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Slip in mount for the AR637T.  The dual antenna can be routed to one of 4 holes each allowing you to easily achieve the require 90 degree between antennae requirement.  The holes are sized for PTFE tubing.

The FreeCAD 0.21.1 model file is included so you can easily change hole size.  I've found adding 0.2 mm to the tubing diameter for the holes provides a nice fit.

Printed on Bambu X1C using white ASA and BambuStudio's 0.16 Optimal setting with normal support and hole end down on build plate.  Yes took a few minutes to clean out the support from the holes…  ;-)

Tagi