Spektrum NX8 / NX8+ Transmitter Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Spektrum NX8 /NX8+ and similar RC transmitters
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for Spektrum NX8(+) transmitter
Will also work with Spektrum NX6 and NX10(+) transmitters, since it's the same shell as the NX8(+).
Might also work with other Spektrum transmitters from the DX or IX series, but not tested.
Might also work with similar transmitters from other brands, but not tested.
For mounting use 2x 4,5mm Spax screws or similar (ø5 mm hole / ø10 mm countersunk, 35 mm screw distance).
Printed in Prusament Galaxy Black PLA
0,2 Structural
3 perimeters
15% Gyroid infill
Import the 3mf file as project and everything is ready to go, only adjust your printer and filament.