1 / 4
Spektrum IC5 Battery Connector Cover for R/C Lipo
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cover Snaps on the base of the Spektrum IC5 (EC5) Battery Connector to protect the wire Terminals
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 699
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
IC5 Battery Connector
I have a Spektrum 3S Lipo. I has the Spektrum IC5 Battery Connector SPMXCA501. The cover that protects the terminals broke, and I didn't want to unsolder the connector to replace it. I designed this cover to Snap around the base of the connector.
Print Settings:
- Layer Height 0.2
- Use Supports as the male half does require some small supports on the bottom for the latch. Don't forget to clip them off before you install.
- I used PLA and it seems fine, but TPU, ABS, or Nylon would probably be better.
- It does snap together nice and tight. It should stay put, but I recommend using a little glue on the latches and wrap some electrical tape around the outside just to be safe.
Want More Free Designs? It helps if you please click Like and/or leave a comment!