1 / 4
Spektrum IC5 Battery Connector Cover for R/C Lipo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This cover Snaps on the base of the Spektrum IC5 (EC5) Battery Connector to protect the wire Terminals
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 78
- Makes
- 0
- Views
- 699
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
IC5 Battery Connector
I have a Spektrum 3S Lipo. I has the Spektrum IC5 Battery Connector SPMXCA501. The cover that protects the terminals broke, and I didn't want to unsolder the connector to replace it. I designed this cover to Snap around the base of the connector.
Print Settings:
- Layer Height 0.2
- Use Supports as the male half does require some small supports on the bottom for the latch. Don't forget to clip them off before you install.
- I used PLA and it seems fine, but TPU, ABS, or Nylon would probably be better.
- It does snap together nice and tight. It should stay put, but I recommend using a little glue on the latches and wrap some electrical tape around the outside just to be safe.
Want More Free Designs? It helps if you please click Like and/or leave a comment!