1 / 4
TP-Link 1U rackmount housing for ER7206 router mk II
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of TP-Link 1U rackmount housing for ER7206 router by calipsoii. I changed the backstop and strengthened
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 503
- Wydruki
- 0
- Wyświetlenia
- 4485
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (60)Powiązane
This is a 1U rackmount adapter that allows you to rack-mount a TP-Link ER7206 Omada VPN router. It is a remix of TP-Link 1U rackmount housing for ER7206 router by calipsoii. I changed the backstop and strengthened the frame.
Parts Required
This adapter is split into two pieces so that it fits on a standard print bed. To join the two halves together, you will need:
- 2x M4 hex nuts
- 2x M4-12 cap head screws
- CA Glue
Print Instructions
- Printer: Anycubic Kobra standard
- Print Settings
- 0.2mm layer height
- 4 walls
- 4 shells top and bottom
- 50% infill
- Filament: eSun Matte Black PLA+
- Supports: none
- Brim: none
Assembly Instructions
- Print both halves of the assembly with their faceplates pointing down into the bed.
- NOTE: printing in this orientation means your printer must bridge a 25mm gap. Ensure you have appropriate cooling for that.
- Print custom backstop and secure to router repurposing the existing screw in the back of the router.
- Use two M4-12 bolts and nuts to join both halves of the assembly together. I used CA glue for additional stability