1 / 5
Simple and best filament guide (Ender 3) | No screws required — zdjęcie 1
1 / 5

Simple and best filament guide (Ender 3) | No screws required

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Guide for filament. No screws or bearings required. Just slide it into place.

Ocena
5 / 5
Polubienia
8
Pobrania
53
Wydruki
1
Wyświetlenia
326
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Print temp - 200C

Layer height - 0.12mm (small object, 0.12mm gives more resolution)

Turn it sideways and print it with supports for a better print.

Tagi