Liczymy pasujące modele…
Remix based on: Yeezy Slides (Printable) By Orangemn6 Yeezy Slides separated (right and left one) and scaled. Shoe Size: 9.5 US MAN / 7.5 MX Scale it as you'd like UPDATE: 18/08/22 I printed right slice and it was a bit smaller than…
A CFS stand with a bottom slide out to access the lower CFS unit easily when needed. ( 10 Print Files Total needed for this print). You will need bolts to attache the plates to the side walls(M4), just screw bolts into the holes, nuts not…
Don't want to go on onshape and figure out what config you need, here is a pre exported version of the most popular configuration of opinsert, along with a bill of materials for everything you need.…
Easter Bunnies to brighten your day! This fun light switch decoration can easily slip behind a light switch wall plate and stay in place securely with the built in mounting slats. The two bunnies depicted in the print are busy hiding…
For building this drawers, you need a router, a drill and a saw. The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull. There are PDFs with the technical drawings, please refer to them, to see…
When tested with 15% infill PLA, it seems to be fine for typical beverage loads. I used a countersunk head screw with a diameter of about 4mm. Print Settings Printer Brand: Kingroon Printer: KP3S Rafts: No Supports: No Resolution: 0.2mm…
Took the original HF right fan duct and integrated holes for SlideSwipe magnets, as well as wire channels. Geometry has been taken from the DragonBurner V8 fan duct that supports the same probe BOM 2 6x3 magnets 2 wires follow the…
Linear Slide and a Tilt Angle Slide, with different head screws and an additional bracket. These are made for M4 inserts and M4 screws.These are great for CNC plates and adjustments, Camera slides, robotics, and alot of other science…
Slideshow The lid on this box slides open and closed at an angle. This means that the pieces do not simply fit in, especially if there are already pieces in the box. The goal is to pack the four pieces and close the lid. Printing…
Added three groves for PTFE 4mm tubes so the spools slides more easily on the holder.
I made this mount to hold various accessories on top of my print head. I have also included the blank slide so that you can modify it to hold whatever you need it to. If you make your own accessories please post them as a remix, I would…
A colleague needed a box for microscope slides and found this model first: https://www.printables.com/model/810152-microscopy-slide-box . It worked sufficiently, but after some usage, the following we needed some adjustment according to…
Ryobi power "thief" slides on - V2 It has flex so the bolts keep a good connection --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No supports
Simple Curtain Hanger Slides, easy to print and perfect for replacing or adding slides to your curtain system. No suppor
Shonk created a fantastic action tracker for Pathfinder 2. This remix updates the model to add magnets (I love magnets!) so that the sliders will magnetically snap into their up or down position. Updated all of Shonk's versions; extruded,…
Updated: 1/26/25 - MORE DUCKS!!! Duck variations: Afro Duck (coming soon) Alien Duck (coming soon) Angel Duck (coming soon) Artsy Duck (coming soon) Beanie Duck (coming soon) Business Duck (coming soon) Cap Duck (coming soon) Cozy Duck…
FTC 21196 Norwood Industries linear slides. Featuring anti-slip bearings.
This is a small sliding box that I designed specifically for photo slides, but it can be used for anything that fits inside of it.
This is the ideal mount for VTech Interactive Microscope Smart Slides. No adhesive or screws needed; simply insert it in
This drawer support replaces the ones in wooden ikea chest of drawers
Printing I recommend printing from ASA material because of its ability to be post-processed to a glossy surface like a porcelain. For better results slice the part with 3 perimeters and 100% infill and layer max 0.20mm. For Bottom part is…
This is a diffy assembly using axon bevel gears for a gobilda viper slide. There is .step and .3mf provided. If you have questions reach out to us on our website or instagram.
These are an exactish copy of the clear stands with 2.2mm slot in the center to hold the little cardboard characters for the game. Made this myself for my daughter, she was thrilled. I figured maybe someone would need something that holds…
Give your dummy some style, with these kicks! This file should clip onto the bottom foot joints! And, For the first time, my website, 3DLAB !
For building this drawers, you need a router, a drill and a saw. The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull. There are PDFs with the technical drawings, please refer to them, to see…
I'm happy with these now. Edit 4-16-2025 7:27EST - Added Outer slides with extra height to clear Frameless hinges with ¾ thick cabinet doors. Edit 4-17-2025 8:51 EST - Changed 3mf file to only have one outer slide per design. Printing 2x…
I liked the simplicity and functionality of Jose's design. But I wanted a bit more organization. One compartment for taller tools (like nozzle plunger), one for shorter tools (like filament cutter), and one for putting screws and parts…
Flutter photoframe on Raspberry Pi 4/5 with human detection, buttons. (Google photo, local storage) Features: Shows a slideshow with different effects. Pause/Play Screen On/Off Support Image/GIF/Video Support 2560x1600 resolution…
Remix from Araneus0390's model which is fantastic, but a little too tight on the tolerances for some of my slides! See the original model below for the awesome features this box has. This model has increased tolerance for the slides…
When tested with 15% infill PLA, it seems to be fine for typical beverage loads. I used a countersunk head screw with a diameter of about 4mm. Print Settings Printer Brand: Kingroon Printer: KP3S Rafts: No Supports: No Resolution: 0.2mm…
The spacers have an upper recess for the cover glass. They can be permanently attached to the slide and to the cover glass by using UV resin. The cover glass size and it's overlap with the spacer, and the number of spacers, and also the…
These snap-together drawer slides are designed to stack Gridfinity boxes vertically (5-unit depth) for easy access without unstacking everything above. The concept allows you to pull a box out like a drawer using the front handle.…
Rear mounting brackets for side-mount drawer slides for a drawer in my kitchen. I am not sure of the brand, but my house was built in 1992, so if you have old drawers with this same kind of rails, then you should be able to use these.…
Storage box for 80x 35mm Slides Simple storage box with hinged lid. Holds 80 35mm slides. Has space between the slides to allow for easy access. To connect the lid just feed in 1.5mm filament throught the hole and cut at each end. Lots of…
Don't worry about the look of the body and the wheels, Its been to the skatepark over 30 times on 3s. One file works for both left and right. new file added! has a retainer that fits on to the outer edge to keep the paddles from sliding…
These are two preliminary saddle slides for Lanakai TunaUke ukuleles. The short and tall stock versions. They should work on any size TunaUke, baritone, concert, tenor. I was having a problem finding spares that came with the instrument…
I designed these inlets to fit glass slides into standard pipette tip boxes, perfect for wet chambers or storage. Compatible with: TipOne brand boxes Slide size: 22 × 50 mm These inlets keep your slides secure, greatly reducing the risk…
Purpose To prevent annoying problems with round cover glasses in square containers… this wonderful and breathtaking design was developed over years of dedicated and tireless work... Take a look and let the magic sink in over these rounded…
This is a support to allow microscope slides to dry. Gaps are 1.5mm wide. Fits 20 slides. Simple print, no supports.
Build with Raspberry PI Zero 2W and a Spotpear Touchscreen - RPI-Touch-Case bundle You can find build instructions on my Github I used something like This to cover the screws at front You only need screws that comes with the touchscreen -…
I've bought the prepared slides for microscopy here https://aliexpress.ru/item/4001085329229.html The slides came in the wooden box, but the incert (holder of the slides) was broken. So I made this incert. It is tight fit inside the box.…
I have the same slides as plbarrio ( https://es.aliexpress.com/item/A-Set-Plastic-Prepared-Microscope-Slides-Animals-Insects-Plants-Flowers-48pcs/32773548174.html ), and I'd like a storage solution, so I remix the original: close the…
For those that use the EBow ( https://ebow.com/ ), it's an awkward thing to put down when using it in a gig. I've seen some drill holes in theirs so it can hang from a string on the mic stand but I didn't want to do that. So I designed a…
This is a case that can store 48 film slides with a frame to hole the film, the designed volume for the film slides is 50x50x4mm. 24 slides can be stored on each side.
I recognize that I'm probably the only person that needs these. But they're kinda cool anyway. One of my local cigar retailers gives away boxes and I always take them because they're great for smalls. This one's so big I decided to make…
Took the original HF right fan duct and integrated holes for SlideSwipe magnets, as well as wire channels. Geometry has been taken from the DragonBurner V8 fan duct that supports the same probe BOM 2 6x3 magnets 2 wires follow the…
My current project involves a precise sliding motion - low friction but also low slop. One way to achieve low slop would be to dial in my printer to the Nth degree and size the parts “just so”, but I took the alternate approach of making…
One inch slide files include: Double slot (1DoubleSlot) Triple slot (1TripleSlot) Triple slot 1 inch double to 1.25 inch single [1(2)to1.25(1)TripleSlot) One and a quarter inch slide files include: Double slot (1.25DoubleSlot) Triple slot…
Linear Slide and a Tilt Angle Slide, with different head screws and an additional bracket. These are made for M4 inserts and M4 screws.These are great for CNC plates and adjustments, Camera slides, robotics, and alot of other science…
A lamp for studying that goes under the monitor arm to stay standing, takes no space on the desk.
Slideshow The lid on this box slides open and closed at an angle. This means that the pieces do not simply fit in, especially if there are already pieces in the box. The goal is to pack the four pieces and close the lid. Printing…
🧪 Ultrasonic Slide‑Cleaning Carousel (25 mm × 25 mm Slides) A solvent‑resistant 3D‑printed carousel for cleaning small microscope slides in an ultrasonic bath. Summary This project is a circular slide‑cleaning carousel designed to hold 25…
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
Simple thing to hold organization boxes. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Category: Organization
I loved the original design of this CFS rack, but was having trouble finding the recommended 35mm rails for a reasonable price. Ordered some 45mm soft close ones on AMZ from Baidice and once I had them, edited these parts to work…
In education you often had to clean a lot of microscope slides after a lesson. So its good using a dishwasher for that. A holder for 30 slides make it easier. USE PETG, because the temperature in a dishwasher is higher than 60°C!
A 3d model of the yeezy slides. I scanned it with polycam and then touched up the mesh in blender. If you want the blend file, ask in the comments! Please make sure to drop a like if you download, it helps a lot to support me! Edit…
Hang it at the junction of the legs. 1x slot to store your smartphone 1x hole for a can or bottle 1x hole for anything It measures less than 200mm wide and will consume around 200gr. wall thickness: 2mm Top/botton: 2mm infill 10% Print…
EDIT: This is a simple design. Requires no supports, and slides under the desk when not in use. Has a long print time, but well worth it as it only requires mount screws beyond the print material.…
I made this adaptors for slides and negatives for my Sigma Macro lens that has a filter thread of 55mm needs uniform light (I simply point to a white wall well illuminated and far enough to be out of focus) printed on PLA at 0.2 Created…
The dark slide snaps in place in the holder. Clip the holder on e.g. Shoulder straps Belts Camera bag dividers Pockets etc. ------------------------------------------------------------ Print in the default orientation without supports .…
A box designed to hold 10 rectangular petrographic thin sections. The slots are designed with a “V” notch allowing the sections to be held without touching the sample surface. This protects the sample and any conductive coating applied…
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
These swatches can help you figure out the layer height you want for flat translucent prints. The left column is the thinnest layer height, the middle column is the thickness noted, and the third column is the thickest layer height. Print…
I wanted to make a casual slipper-type shoe like the Yeezy slides, and was inspired by Appa from Avatar the Last Airbender. I designed this in blender and sliced it with Cura. This shoe is a size 8, so scale appropriately based on that. I…
Printed in PETG 0.4 nozzle 0.2 layer (spacer in 0.3) height and 3 walls 25% cubic infill. Happy printing and fixing stuff !
Model created during and for my PhD work. A 3D printed case to hold 2 slides without touching their surfaces. The case is closed with a pressure-fit latch. A 2 mm outer diameter rod is needed to complete the hinge mechanism. The spring…
Developed for my PhD work. Expansion tray for use with 30mm x 25mm x 1-1.3mm glass slides. This can expand the capacity of other slide holders made for standard thin-section sized slides or can be used alone for desktop organization.…
this is a super simple, easy to print and cheap way to make linear slides with the tetrix system. the slide used pulleys to extend and retract. I would recommend to print the pieces with a high infill as they must survive many different…
A holder for the Smart Cards/Slides that come with the Microscope. Design need to be glued on (I used doublesided tape on the curved part at the front). I printed it with the angled bottom of the holder flat on the bed and used support.
Coffee table welded from 18x18 profiles - it scratched the floor when moved. And on the carpet - it was hard to move it. I got these legs. Steel profiles that I bought to build a table - they were supposed to be 18mm x 18mm, in reality…
Work in progress, not tested. This is a Remix of Voron 0.2 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to…
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
Open Source: I have redesigned Sloffies to be fully parametric; the script is Open Source you are free to remix, adapt, and build on the existing design. Github: https://github.com/Jeandre-Groenewald/Sloffies---Parametric-slides I have…
I've used these https://www.junker-slides.com/full-extension-slides-kv1-25-h35-l350-nf-350-mm.html slides, but using the scad file it should be easy adaptable to other slides.
Can be submersed in a beaker to clean glass slides. Print from e.g. PETG for better resistance to cleaning solutions.
These boxes are designed to stack, but they are annoying to access if you cant get to them one at a time. I designed these slides to fit between two pieces of wood placed exactly 375mm apart. They can hold quite a bit of weight.
Guitar slides in S, L, M and XL sizes that are more or less what you would encounter in a music store. Inner diameters and lengths: Size S - 17mm inner diameter, 55mm long Size L - 19mm diameter, 59mm long Size M - 21mm diameter, 64mm…
These are designed to have a wood front attached that matches whatever furniture you're attaching to. The slides are basic groove fit. The rear can either be wood again or printed (depending on max print bed size). The bottom of the draw…
Manufacturing procedure: Material: PLA, PETG 3D Printer: FDM 3D printer, average print time 1 – 2 hours, depending on settings Slicer settings: 0.2 - 0.3mm layer height Post processing instructions: Clean the stringing Assembly…
This is a remix of the servo probe arm (Arm1.stl) and rail mount top (RailMountTop.stl) parts for the SlideSwipe probe for Voron v0.x printers by chestwood96. I bought a pack of five MG-90s servos from Amazon , which came with stickers…
This is a remix of the frame mount (RailMountSide.stl) for the SlideSwipe probe for Voron v0.x printers by chestwood96. The original uses a snap-in approach to hold the SlideSwipe mount on the 1515 extrusion. This remix uses two M3 nuts…
Simply print it from any material and start using glass slides on your Nikon microscope. You can also access our editable CAD model online here on onshape.
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
Manufacturing instructions: Material: PETG, PLA 3D Printer: FDM 3D printer, average print time 7 hours. Slicer settings: 0.3mm layer height, 3 perimeters Post processing instructions: Clean stringing, use 2pcs M4x20 bolts to attach lid to…
Customization of http://www.thingiverse.com/thing:518915 with some extra parameters added. Supplied model is for https://aliexpress.com/item/1005005191543947.html. 🇪🇸 Personalización de http://www.thingiverse.com/thing:518915 con algunos…
Sized to fit on my printer and with a dovetail join. To install a full set of slides in a Kallax cube, print 6x of each slide, 2x of vertical alignment guide, and 1x of front alignment guide. Requires #6-¾ screws or equivalent and use MDF…
As long as I love my AirPods Pro, I've never been happy with existing protective cases. They may protect from scratches. But when the case is dropped with the AirPods still inside, the case opens as it hits the ground, and the AirPods…
NEW VERSION HERE! https://www.printables.com/model/801506-slideswipe-adjustable-top-extrusion-mount-with-cab When upgrading my Voron 0 to a tri-zero I wanted to keep using my SlideSwipe probe. This meant moving the motor attachment from…
Simple trimming of the SlideSwipe probe carrier piece, which allows using less y axis space for pickup and dropoff. Particularly useful when paired with my SlideSwipe top extrusion mount if you want to mod your voron 0 into a tri-zero
During my tests comparing different microswitches like Kailh, Omron D2F-01 and D2HW the latter showed better accuracy and better stdev. The issue however D2HW won't fit into slideswipe probe. Won't be good for regular D2F switches though.…
This is a Remix of Voron 0.2 R1 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (not enough space to use 6 x 3) You need all other…
