1 / 5
Slides and Jigs for Drawers (Schubladenauszug mit Hilfmittel) — zdjęcie 1
1 / 5

Slides and Jigs for Drawers (Schubladenauszug mit Hilfmittel)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slides for a DIY-Drawer. Jigs for a Bosch AdvancedTrimRouter 18V-8 to build drawers. With Guide.

Ocena
5 / 5
Polubienia
23
Pobrania
77
Wydruki
0
Wyświetlenia
901
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
GNU General Public License v3.0

For building this drawers, you need a router, a drill and a saw.

The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull.

There are PDFs with the technical drawings, please refer to them, to see how it works.

The wood should have a thickness of 18mm. The MDF panel should be 3mm thick.

Between the side panel of the drawer and the cabinet side should be 5mm.

For installing the slides, you will need 8x 3,5mm pan head screws, with a minimum length of 20mm. I use Fischer PowerFast II PTF 3,5x20, Spax 4201010350202, Heco 60223 or simular should also work.

Don't use screws with a countersink head, they will destoy the slide.

 

I printed everything from PLA. For the slides I used 5 perimeters.

Tagi