Slides and Jigs for Drawers (Schubladenauszug mit Hilfmittel)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slides for a DIY-Drawer. Jigs for a Bosch AdvancedTrimRouter 18V-8 to build drawers. With Guide.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 77
- Makes
- 0
- Views
- 901
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
For building this drawers, you need a router, a drill and a saw.
The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull.
There are PDFs with the technical drawings, please refer to them, to see how it works.
The wood should have a thickness of 18mm. The MDF panel should be 3mm thick.
Between the side panel of the drawer and the cabinet side should be 5mm.
For installing the slides, you will need 8x 3,5mm pan head screws, with a minimum length of 20mm. I use Fischer PowerFast II PTF 3,5x20, Spax 4201010350202, Heco 60223 or simular should also work.
Don't use screws with a countersink head, they will destoy the slide.
I printed everything from PLA. For the slides I used 5 perimeters.