Voron 0.2 SlideSwipe mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Try to modify the Voron 0.2 print head to use with SlideSwipe from chestwood96 on Github. It is Work in progress,
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 206
- Wydruki
- 0
- Wyświetlenia
- 3877
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Work in progress, not tested.
This is a Remix of Voron 0.2 Front Cowling to use with SlideSwipe from chestwood96 on
https://github.com/chestwood96/SlideSwipe.
The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to use same magnets)
You need all other parts from SlideSwipe project, please find the BOM, all required STL and additional information on the github page.
Only two parts are modified to fit the size of the new print head.
The project and the new parts are licensed under "GNU General Public License v3.0"
https://github.com/chestwood96/SlideSwipe/blob/master/LICENSE
The Voron Project license can be found here
https://github.com/VoronDesign/Voron-0/blob/Voron0.2/LICENSE