1 / 4
TLR 22X-4 - 78t/81t Spur Gear Cover — zdjęcie 1
1 / 4

TLR 22X-4 - 78t/81t Spur Gear Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a direct drop-in piece to protect your motor cables from your spur gear.

Ocena
0 / 5
Polubienia
7
Pobrania
80
Wydruki
0
Wyświetlenia
434
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Update 10/26/23: It was brought to my attention that the original design did not fit the 81t spur which is included with the slipper and center diff. I redesigned the cover from the ground up using Fusion360 instead of TinkerCAD and tweaked the dimensions so the new cover will protect both the 78 and 81t gears. It was also requested I enclose the space around the gear to help reduce dirt from getting in, so that is now provided as an optional model.

 

Original Description:

During a race my motor cables got ripped up by my spur gear due to a zip tie failure. This piece is a direct drop-in on the center brace and will prevent cables from coming in contact with the spur gear without the need to zip-tie all your cables to the brace.

It requires supports to print - I recommend using Lines (Cura) or Organic (Prusaslicer).

V2 will clear the spur gear whether you're running a slipper or a center diff with the 78t or 81t spur.

Tagi