86 modeli
The weak point of the Team Losi Racing 22x4 4WD buggy has always seemed to be the front gearbox/bulkhead, often breaking to leave the shock towers ‘floating’ above, and the repair is not quick during a race event. These simple braces act…
Tower Guards for the TLR 22 5.0 Elite. I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got “TY24MX…
This is an adapter to attach Streamlight SLR-8 laser sight to a WALTHER P99 AS .40 *** IMPORTANT FOR RESISTANCE*** Print Vertical with front against the printer bed. 100% INFILL Print as a whole , the piece snaps in. Place one rail and…
“Gaspedal” thumb support to aid in recoil control! Now much more streamlined and uses more standard hardware. You can still have this printed in metal for a more robust feel, but since the threads are handled by the inserted nut you can…
Tower Guards for the TLR 22x4 I will add a rear guard soon and update the designs with version numbers if needed after some testing. This is designed to be attached with zip ties and I wanted good quality ties so I got "TY24MX Thomas &…
A remix of Lupo's Streamlight TLR-1 Dummy I am also including different rail keys for adjusting the placement on picatinny rails. I have included the original switch as I did not modify that. Hardware: 2x M3x20mm bolt and nut (for clamp)…
I needed a holster for my gun. The place I ordered from was taking a really long time, so I took matters into my own hands. This holster still has great retention and I drilled holes in it so I could use an UltiTuck clip. As always, treat…
Ruger Mark 22/45 MK III, IV 22lr Bull Barrel, picatinny adapter, for Mantis X or Tactical light. TRL-1, TRL-7,… Designed to fit the Ruger Target pistol with the 22mm diameter bull barrel. Rounded front, to make sliding on of Mantis X…
Rail keys for the Streamlight TLR-1 in several different "sizes" “0” is centered on the hole, each number is the mm offset from that center. Fits an M3 nut in the slot.
Non destructive modification for Lubitel 166B camera to turn it into instant camera. Uses Instax square cartridges. Check notes for each file. Except a few files, all should be printed without supports. Use at least 3 walls and 20%…
This is a modified version of Austin Lively's p365 tlr7sub mounts to tight up the mounting and better suit my personal preferences. I settled on this length after trying out a few variances because it's the largest shelf that can be added…
a replacement key for TLR-7 Sub to move it about 5mm back to better align the rear buttons with the trigger guard of some 1913 railed pistols
Just added a simple logo. Works with mano Yashica TLR cameras (Mat 124 / 124G etc) Category: Electronics
None of the locking keys of 1913 style provides a great fit for my Streamlight TLR-7X on my Sig Sauer P365 XMacro. So I made one for myself. If need to deal with real recoil obviously you'd want to print in some durable material. I…
Key for TLR7Sub for the FLEX-FCU Housing (X length)
You're going to probably want to super glue the two parts together, though it isn't strictly necessary.
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
NOTE: 09/21/2025 G3 and G4 holsters for suppressor height front sights up to 10mm added. This is a pair of open bottoms TPU holsters for the Gen 3 and Gen 4 Glock 19. It will fit pistols both with and without a TLR6 tactical light. It…
Streamlight doesn't sell these as far as I could see (unlike TLR-1, 3/4, or 7/8 keys) so I cloned them. Now you can replace your keys without buying a new $300 light.
This is a lens hood designed to fit the 80mm lens for the Mamiya C220 and C330 family of twin-lens-reflex cameras. The dimensions are roughly worked out from online images of the original metal hood. The diameter of the clamping section…
This is an adapter for the Streamlight TLR7 flashlight, allowing it to be mounted to various devices with proprietary rails. Originally done by T.Rex Arms.
The adapter makes it possible to fit standart cable releases to various TLR, Leicas and old Nikon cameras. The threads are very fine. Print the adapter at leas with a layer hight of 0,1mm. If you can, print it even finer. The adapter is…
soooooo this is a Modular Holster I designed. I took big inspiration from the OpenSource files of T-Rex Arms SideCar. Should work with many Pistõlas, as long as you have a TLR-1HL light, maybe even O-Light PL2 The “Friction Washer” is not…
For the off chance that you lost or broke your flashlight; here you go! Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: Yes Resolution: 200 Infill: Whatever you feel like Filament: Matterhacker PETG…
These wheels are based off of the factory wheel dimensions. You will get the best results printing with support (required to get the final lip on the top to be 90 degrees for a good seal on the tire). Select the option to print support…
Streamlight TLR-7 HL-X Sub Lens Cover This lens cover is a great accessory for protecting your light while at the range. It helps shield the lens from gunpowder residue, keeping it clean and clear for optimal performance. Printed with…
to install, push Tlr-6 into trigger guard. sand Tlr-6 if needed. after you have installed the Tlr-6 on the trigger guard, plug holes on Tlr-6 with 1.75 mm filament to finish the installation. Make sure to check out some of my other designs.
These are SVG Files to cut your own chassis protectors for the TLR 22x4, 22 5.0, 22 SCT 3.0 and the Vision Racing 22T-XT Chassis. There is also a TLR key chain because I had to upload a model file of some kind to post these. I am still…
A modification of the TLR1-HL key to bring the light closer to the trigger guard but not bind on the guard. This is similar to the TSW-99 key. I lost most of my keys for this light, so I had to print a replacement. Note: some…
A holster that mechanically resembles certain commercially available A utomatic L ocking S lide Holsters. Airsoft only, please do not use this for actual carry! Just buy the real one, please. Compatiblity: This Holster was built around a…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
I modeled this to work with my Sig Xten comp 10mm with a Four Brothers holster, but it works with my Gunfighters Kenai holster as well. it should work with other guns as well. I made this since my holsters tensions off of the light and…
Basically just changed the shape of where your thumb goes to a more standard angled design. Both shorter and longer versions are available.
I bought this camera a few weeks ago and it came with a metal lenscap but I found it was incredibly difficult to use as it required a lot of force to snap onto the photo lens, so I made a copy of it but changed some things to make it fit…
Update 10/26/23: It was brought to my attention that the original design did not fit the 81t spur which is included with the slipper and center diff. I redesigned the cover from the ground up using Fusion360 instead of TinkerCAD and…
Minor alterations
This was designed to fit two of every sway bar because the front and rear bars are the same. Since tolerances with 3D printing can vary a fair bit you may need to scale parts up or down to get the fitment just right. A little sanding on…
This is a gas pedal for the TLR 7 Sub for a P365 X Macro. I remixed this model to better fit my pistol and the shooting. I extended to shelf so it better fits the frame of X Macro and also lowered the picatinny clamp so the light sits…
This fan mount for the Protek RC PTK-2112 fan ( or equivalent ) and TLR 22x4 Elite 4WD buggy makes two key improvements over the stock setup. First, it moves the fan back in the chassis for much improved airflow, as the fan is no longer…
Hello :) This is a little friction-fit lens cap I designed for my old Rolleicord II (first version with Triotar 3.5 lens, I don't know if it will fit others). It holds mainly on the taking lens and has little legs not to twist away from…
You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly. There is also a battery strap mount…
Battery Hold Down Strap for Losi XXX-T Stadium Truck. I couldn't find this one so I designed it in FreeCad. I made two different lengths because I don't have a Losi XXX-T. Someone told me the length, but there seems to be some confusion…
I have remixed the holster so that it has an integral magazine pouch added to it and made some minor adjustments to improve print quality.
Slide on offset step-up ring to 58mm thread for Mamiya TLR (C330, C220). Tested on 80mm f/2.8 and 105mm f/3.5 lenses. There is no thread designed for 58mm side, but print surface provides enough friction for a snug fit. Print is done in 2…
Broke the stock and the price to replace was 2 bumpers for $7. Print in TPU for a virtually indestructible bumper. For best durability, print in TPU or PETG, although PLA+ has lasted a long time as well. Print in an upright orientation…
Remixed to add 1.5mm to the rail slot to prevent flashlight from sliding forward/backward. Printed in Hatchbox PLA Pro. Fits pretty snug and may require a little force to get it seated.
The stock keys don't allow the VIR to sit close enough to the frame without coming into contact with it. This places it as close as it can be without rubbing and throwing off your zero.
A friend's kydex holster was wearing off the finish on his Sig P938 and, having a Streamlight TLR-6 mounted, it was difficult to find a replacement holster. We decided to see what TPU would do, and this is what I came up with. The holster…
Previously used the ‘F’ marked index key for a Streamlight TLR-4 on a Walther PPQ, but the light sat too far forward so I decided to make my own. I designed this to utilize both lugs so it is longer than standard keys. Using this key…
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
This is a Lens Cap for the Streamlight TLR-1 HL This may also fit the Braun - 1000 Lumen Rail Mount LED Light (This cap fits my Braun light, but is slightly loose)
These TPU pieces are more than just shock tower guards for the TLR 22x4 4WD buggy; they integrate the shock bushings, and the rear ‘fins’ help absorb energy during upside-down impacts in order to help save the rear wing. There are two…
A tiny simplified TLR Camera, a knick knack or a dust collector as I like to call them
This is a camera mount to enable you to put your Chuzhao TLR digital camera onto a tripod. Yes it is silly, yes it is pointless but it does add a bit of extra something to this toy of the camera. to make this mount you will need a 3/8-16…
There are two versions of this mount for each car. One if you are using the rear tower guard I designed and one if you are not running a rear tower guard. This part should be solid TPU and everything just mounts with zip ties. You can…
This TPU front bumper for the Team Losi Racing 22x4 gives some improved shock absorption over the stock plastic piece. Although head-on front collisions with the bumper are somewhat rare, the bumper reapeatedly makes contact with hard…
Wasn't able to do any reload drills with the Mantis Sensor on the magazine and with out the TLR-1 HL light, the firearm fitted too loosely in the holster. Mount the sensor “forwards” and push it all the way back on the rail and the fake…
The main design of this case is to allow high air flow for the framework mainboard Bottom case x1 Top case x1 Case screw x4
Used camera, with a remarkable remarkable ROKKOR 75mm, f 3.5 lens, came without case or lens covers from a local camera swap. Alas, I printed some. Thickness of top and bottom caps must be different, bottom lens cap is thinner due to…
A lens cap for the Mamiya Sekor 105mm TLR lens done in the style of the original lens cap. Printed on a textured bed with fuzzy skin on the outside walls. Some supports may be needed for the text on the cap.
Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…
Simple dummy flashlight loosely based off of a TLR 1. Its missing the on/off switch. I could only really test it on the picatinny rail of the ICS Carnotaurus but it should fot most normal pic rails if its a tight fit i would recommend you…
Modeled this part as it's not been available for purchase for a while. Best printed in nylon (The original is PA6-GF30. I used Polymaker PA6-GF Grey). I printed with the front part face down (as oriented in upload) and it was a pretty…
I found the gap to big for liking with the 1913 key so it needed to be adjusted.
Remix of Streamlight TLR-7/A Lens Cover Changes Slit light cover Double slit light cover Scaled down to 99.5% light cover (better fitment) Scaled down to 99.5% slit light cover Scaled down to 99% double slit light cover Category: 3D…
This is a simple replacement battery strap for the non-Elite version of the TLR 22X-4 kit. It is intended to be printed out of TPU. The print settings are very important so that it stretches like the OEM rubber strap. Print settings: 1…
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
A set of shelves to store Mamiya TLR Camera Lenses on the Skadis pegboard system Three shelves are included with the focal length of the lens displayed on it. These are for the 55, 105 and 250mm lenses. The 55 and 105mm shelves are…
Slots in where the 645 mask would go on the Lubitel 166U and Lomography Lubitel 166+ and allows the user to take up to 24 Xpan ratio panoramic images on a roll of 120 film. [Not usable on other Lubitel models like the original, 2, 166,…
Streamlight TLR 4 A Key Picatinny Rail Adapter If you need it, you need it.
The main design of this case is to allow high air flow for the framework mainboard Bottom case x1 Top case x1 Case screw x4
This is a camera mount to enable you to put your Chuzhao TLR digital camera onto a tripod. Yes it is silly, yes it is pointless but it does add a bit of extra something to this toy of the camera. to make this mount you will need a 3/8-16…
This is a 2U Right-Stepped Slash & IntlRo Keycap. Only left side of the key switch activates even if you press the right side of the keycap. This keycap uses OEM profile. I made this keycap because key rollovering with IntlRo didn't work…
I found the gap to big for liking with the 1913 key so it needed to be adjusted.
This is a Lens Cap for the Streamlight TLR-1 HL This may also fit the Braun - 1000 Lumen Rail Mount LED Light (This cap fits my Braun light, but is slightly loose)
This is a gas pedal for the TLR 7 Sub for a P365 X Macro. I remixed this model to better fit my pistol and the shooting. I extended to shelf so it better fits the frame of X Macro and also lowered the picatinny clamp so the light sits…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
Magnetic holder for Streamlight TLR7sub, when it is not in use. I used magnet d10mmx10mm
This is a remixed double tray dryer. Size : 16x9x12cm. OpenSCAD file contains 3 versions. Printed model is the third one. The others are prototypes and are not intended to be printed as is. Look at the print notes below. Print Settings…
Spacers for a common modification to a Losi/TLR TLR22/22T Instructions This is a spacer set for a TLR 22 22T to raise the transmission case by 1mm, as decribed in the Losi racing blog entry…
For those like me that throw away boxes and don't read directions. Here is a replacement mounting plate for tlr-7 sub compact weapon light. Designed for palmetto state armory dagger. This mount positions the light flush with the end of…
