TLR 22 SCT 3.0 Laydown Conversion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are parts I designed to allow fitment of a lay down transmission in a TLR 22 SCT 3.0
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly.
There is also a battery strap mount design that uses the parts from the TLR 22x4 Battery Mount.
I used 6mm spacers in the kit front shocks to limit front droop and used another set of front shocks on the rears with no spacers inside.
I also used the 4mm rear tower spacer but I included a 5mm if you want to run a little longer shock.