TLR 22 SCT 3.0 Laydown Conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are parts I designed to allow fitment of a lay down transmission in a TLR 22 SCT 3.0
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 0
- Views
- 653
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
You will need various longer M3 screws, M3 washers, M3 Lock Nuts, M3 female thumb screws, body mount (LOSB2414), Rear 22T tower with body mounts cut off (TLR234093) and a lay down transmission assembly.
There is also a battery strap mount design that uses the parts from the TLR 22x4 Battery Mount.
I used 6mm spacers in the kit front shocks to limit front droop and used another set of front shocks on the rears with no spacers inside.
I also used the 4mm rear tower spacer but I included a 5mm if you want to run a little longer shock.