Team Losi Racing (TLR) 22x4 1:10 Scale Buggy Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These wheels are designed based off of the factory wheels included in the box.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 120
- Wydruki
- 1
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
These wheels are based off of the factory wheel dimensions.
You will get the best results printing with support (required to get the final lip on the top to be 90 degrees for a good seal on the tire). Select the option to print support NOT on the build plate to save material.
This was modeled off of part numbers: TLR43021, TLR43022, TLR7100 and TLR7101
These print very well in PLA, PETG and PA-CF.
Highly recommend using PA-CF if you use your RC in a wet/damp environment as this increases strength and the PA-CF is very light weight.