2 to 3 inch plotter/large format printer paper roll adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two of these adapters allowed us to use 3 inch inner roll diameter paper rolls on our 2 inch diameter HP 800PS plotter
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 335
- Wydruki
- 0
- Wyświetlenia
- 1424
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
We had an issue were purchasing bought the 3 inch inner diameter roll of plotter paper for our large format HP Designjet 800PS which takes a nominal 2 inch diameter roll. We could not return the paper of course because we were on a time crunch to get the posters out the door, so we made do with feeding the paper off of the roll by hand for the dozen posters that needed to be printed. After that run I had had enough of hand feeding the paper roll so I whipped up this adapter for the paper roll. It is a tight fit with the partially used roll so there may be some interference between the roll and plotter on a full roll but I cannot test that. This design should however work on any 2 in plotter to adapt it to a 3 inch roll with the caveat that it is of-course not tested.
Good luck and happy printing!