FDL-3 Folding Stock

Folding Folding stock for the FDL-3. Remixed/Inspired from the SIG Style by RegionThr33.

Improvements/Changes made:

1. Improved rigidity across all parts. Allowing a M5 x 50 screw to hold the pieces together, hence improving the strength of the stock.
2. Adapted the dimensions for FDL-3 to allow the stock to fold flat.
3. Improved the model of the release button to be less reliant on print resolution and better folding “clicks”.
4. Shorten stock to better adapt for FDL-3's length

Printing Instructions/Recommendations:

• PLA plus/max
• 0.4mm Nozzle
• 0.2 Layer height
• 15%-30% infill
• 4-5 walls

Certain parts require support - refer to pictures Support1,2,3 for guidance.

Parts needed:

• 1 piece of  M5 x 50mm Screw (to connect the pieces of the stock together)
• 2 pieces of M5 x 40 Screw (to attach folding stock to blaster)
• 3 pieces of M5 Nuts
• 1 piece of M2 x 8mm set screw (or just any M2 screw) or a M2 pin (to hold the button to to the button flag)
• 1 piece M3 x 40 cap screw
• 1 piece M3 Nylon Nut
• 1 piece spring of 6-7mm diameter, 15mm in length