Phone Stand - Truly no supports!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a basic phone stand that actually prints easily with no supports.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 212
- Wydruki
- 2
- Wyświetlenia
- 588
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Yup, here's yet another phone stand. I quickly modeled this after printing a couple phone stands I found on here and they printed like garbage without supports. My goal with this was to print easily without supports, look decent, and stay relatively minimalist.
Print recommendations: See the screenshot from the slicer for optimal print orientation to print without supports. Add a brim if you're printing with ABS/ASA as it's not a ton of surface area on the bed. Standard print settings should work fine. I'm printing it in 0.3mm layer height (with a 0.6mm nozzle to speed up print time), 2 perimeters (3 if using 0.4mm nozzle), and 3 top/bottom layers.
With 15% infill it is roughly 60g of filament (~20m). Print time with my settings is roughly 2hrs (60mm/s speed).