Phone Stand - Truly no supports!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a basic phone stand that actually prints easily with no supports.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 221
- Makes
- 2
- Views
- 616
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
Yup, here's yet another phone stand. I quickly modeled this after printing a couple phone stands I found on here and they printed like garbage without supports. My goal with this was to print easily without supports, look decent, and stay relatively minimalist.
Print recommendations: See the screenshot from the slicer for optimal print orientation to print without supports. Add a brim if you're printing with ABS/ASA as it's not a ton of surface area on the bed. Standard print settings should work fine. I'm printing it in 0.3mm layer height (with a 0.6mm nozzle to speed up print time), 2 perimeters (3 if using 0.4mm nozzle), and 3 top/bottom layers.
With 15% infill it is roughly 60g of filament (~20m). Print time with my settings is roughly 2hrs (60mm/s speed).