Trash Walker (large bin)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an office under desk waste/recycle bin version of the popular Trash Walker.
- Ocena
- 4,5 / 5
- Polubienia
- 14
- Pobrania
- 224
- Wydruki
- 2
- Wyświetlenia
- 1493
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is an office under desk waste/recycle bin version of the popular Trash Walker.
Not just resized but reworked to thin the walls down (they were already thick enough at the desktop size) and make for a deeper bin.
I have printed this with both a .4mm nozzle and a .6mm nozzle. It would print well even at .8mm. Note that at .6mm the waste bin will take 24-30 hours to print and uses 960 grams of filament (yes, a whole 1Kg roll).
This is the single trash bin version of the Dual Trash Walker here:
https://www.thingiverse.com/thing:4178661
Print instructions
Unassociated tags: waste basket
Category: Containers Summary
This is an office under desk waste/recycle bin version of the popular Trash Walker.
Not just resized but reworked to thin the walls down (they were already thick enough at the desktop size) and make for a deeper bin.
I have printed this with both a .4mm nozzle and a .6mm nozzle. It would print well even at .8mm. Note that at .6mm the waste bin will take 24-30 hours to print and uses 960 grams of filament (yes, a whole 1Kg roll).
This is the single trash bin version of the Dual Trash Walker here:
https://www.thingiverse.com/thing:4178661
Print Settings
Printer Brand: Creality
Printer: CR-10S
Rafts: No
Supports: Yes
Resolution: .32 (.6mm nozzle)
Infill: 20%
Filament: Any PLA, PETG, Other Any