StreamLight Flashlight Holder (GoPro Mount, 66608)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
GoPro compatible flashlight mount designed to fit StreamLight MicroStream 66608 and similar model flashlights
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 797
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Small flashlight adapter that fits a standard GoPro mount, the flashlight snaps into place with some force applied. I created this to use on my PAPR for cleaning inside metal printers at work, but there are GoPro mounts for just about anything you can imagine. If you need both hands and a flashlight at the same time this helps a lot.
This model prints with the flat side down such that the only overhang is inside the holes where the bolt will pass through when secured in a GoPro mount. The particular flashlight I designed this for is a StreamLight MicroStream 66608 rechargeable flashlight, but similar StreamLight flashlights will likely fit.
I originally used PLA but the snap fit seemed to degrade over time. I redesigned the file a little bit, but it may be wise to print it with something like Nylon or a CF filament to minimize creep. So far this flashlight holder seems very durable and I use it frequently myself.