SLAB TPU Grip Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Molded TPU lever grip sleeve specifically for the Lever_Big file.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 120
- Wydruki
- 2
- Wyświetlenia
- 1744
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a grip sleeve that is exactly molded for the Lever_Big file option for Silly's SLAB. IMPORTANT: It will not work with the other levers.
Print in TPU with 3-4 walls and 10% gyroid infill. It will act as a natural compression for your knuckles. So less walls and infill will be softer and more walls and infill, it will compress less but still be nicer than bare against the printed lever. It will not really shift, rotate or fall off. Print without supports. No need for gluing. Gently open it up just enough to slide it on and then slide it forward until it stops. With the seam on the bottom, it looks like it's a single continuous piece from most angles.
The sleeve is designed to perfectly match Silly's Lever_Big file from the SLAB. So you can remix the sleeve for yourself but it is non-commercial and will follow any of Silly's original file ownership and his wishes.