IKEA Ivar gap kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hack to fix the gap between the IKEA Ivar doors.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 1891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
Does your IKEA Ivar cabinet have a large gap between the doors? Mine does, and I could fix it with this IKEA Ivar gap kit!
Just print four of those spacers, place them behind the hinges and you have just fixed your problem. Whether it is your, a family member's or a friend's cabinet, you can help them with closing that large unappealing gap by printing those simple pieces.
I printed with Prusament PETG Grey using a 0.8 mm nozzle and 0.4 mm height in only 40min a batch of 4. For those that use the 0.4mm nozzle, I attached the gcode for both PLA and PETG.
Notes: the spacer is 3mm thick as the gap between my doors was of about 7mm. If you have a different gap, consider scaling the model along the z-axis only.
More ideas on how to fix this gap can be found here: https://ikeahackers.net/2020/04/ivar-gap-adjustment.html