Ender 3 S1 (Pro) Pi cam mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the Raspberry Pi cam v1 and v2
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 309
- Wydruki
- 2
- Wyświetlenia
- 1864
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This is my first Fusion 360 design :)
A simple, clean Rasperry Pi cam v1 & v2 mount for the Ender 3 S1 (Pro)
I used this design as a reference and copied only the housing for the cam.
https://www.thingiverse.com/thing:3868687
The base has a nice fit. It fits tight but not too tight around the right side of the x-axis. When is too loose, use can use some tape in between the metal plate and base.
The housing of the cam goes pretty tight on the base. Therefore, use 40% infill (preferably grid) for the base.
Use an M3 bolt of at least 12mm to mount the casing on the base.
Use the Case_front_Pi_cam_1.3 for a Pi 1.3 cam
Use the Case_front_Pi_cam_2.1 for a Pi 2.1 cam
The Pi 3 cam is comming later.
!!-So I noticed that the edges of the metal piece can be a bit thicker or thinner per printer. I think these are metal pieces that are pressed out of a larger plate. That's why the raised edges. I think my edges are a bit thicker. I'll make a model 0.1mm tighter. I Uploaded a base with tighter fit.
I printed everything in 0.20 PLA and for the base 40% grid infill and for the casing 20% infill.
Have fun with it, and let me know if you have any problems or advice.