Vacuum Canister Door Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement latch for the debris canister for the Eureka RapidClean Pro.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement latch for the debris canister on a Eureka RapidClean Pro cordless vacuum cleaner. Ours gets used on a daily basis and after a while the latch loses it's ‘springiness’ and doesn't always close right. So I designed a replacement.
This one prints in about an hour at .1 mm layer height. I recommend using as small a layer height as you can as it is a pretty small object with a few fine details.
Supports (on build plate only ) are recommended on the main latch piece and a brim is recommended for the spring.
A dab of glue is optional to hold the spring into the slot on the latch.