Vacuum Canister Door Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement latch for the debris canister for the Eureka RapidClean Pro.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 41
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
This is a replacement latch for the debris canister on a Eureka RapidClean Pro cordless vacuum cleaner. Ours gets used on a daily basis and after a while the latch loses it's ‘springiness’ and doesn't always close right. So I designed a replacement.
This one prints in about an hour at .1 mm layer height. I recommend using as small a layer height as you can as it is a pretty small object with a few fine details.
Supports (on build plate only ) are recommended on the main latch piece and a brim is recommended for the spring.
A dab of glue is optional to hold the spring into the slot on the latch.