Gerber Armbar Drive Tweezer and Needle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gerber Armbar Drive Tweezer and Needle shim. Basically a V shaped wedge to protect the blade from the tweezers.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 1281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
To install guide the shim with the tweezers (SAK, Swiss Army Knife, 45.5mm size) and close the knife. After the tweezers and can slide in part way and then the needle (must be small diameter). The bottle opener locks it all together. This now has all the tools I'm looking for in a non-piler based multi-tool. It's been going strong as my EDC for several months when I first published this. It did pop a wheelie and deformed a bit following the curvature of blade.
I've attached the STL, STEP and SLDPRT files. I tuned this to jam in snug on my printer and Armbar. You may need to tweak it. I've also included images of the 2 sketches which were spaced 45mm apart.