1 / 1
2-Gang USA Outlet Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2-gang outlet cover for the North American standard.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
WHAT IS IT?
This is a 2-gang outlet cover for the North American standard. It's a simple, supportless print that takes about an hour depending on your printer and slicer settings.
ADDITIONAL HARDWARE NEEDED
- Two 6-32 screws, at least 5/16in deep.
MY PRINT SETTINGS
I sliced my print in Cura using the following settings, and used standard PLA from Creality.
INSTRUCTIONS
- Decide which cover plate fits your use case. The XL is not a standard XL size, but it is large enough to cover up any holes you might need to hide.
- Slice the STL with your preferred slicer. You will probably have to flip the STL over so that the flat surface is flat against the build plate.
- Print the cover plate.
- If anything is plugged in to the desired outlet, unplug it.
- (RECOMMENDED) Turn off the breaker for the desired outlet.
- Align the new cover plate with the sockets and screw into place.
WARNING: EXPOSED OUTLETS CAN BE DANGEROUS. DO NOT ATTEMPT IF YOU DON'T KNOW WHAT YOU'RE DOING.