Magnifying Glass keychain holder [editble]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a keychain holder for a standard magnifying glass, it was made with editable parameters in fusion 360.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a keychain holder for a standard magnifying glass to fit on a simple keychain, it was made with editable parameters in fusion 360 so you can change it to any size that you need!
Printing settings:
2 Wall/parmiters, 10% infill
This model prints in below 15min & under 3 grams
Material:
It is recommended PETG for its flexibly properties, it is much easier to fit inside the magnifying glass without anything breaking. I did not test any other materials.
You might make it work with PLA if you put it into hot water first to make it a little bit softer and then press in the magnifying glass .
Need help?
If you don't how to use fusion360 but need a custom size, direct message me with the correct sizes and I will add it to the files