Rear Sight Blank - designed for Glock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fills in the rear sight dovetail on Gen 5 MOS Glocks. Apparently you can just say Glock in a title anymore?
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 438
- Wydruki
- 2
- Wyświetlenia
- 3706
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This fills in the rear sight dovetail on Gen 5 MOS Glocks. I run full-size RDO on my full-size Glocks and I do not utilize a cowitness for competition shooting. I find the stock rear sight white box to be distracting in this configuration, so I remove both front and rear to (however minutely) reduce the slide weight. I couldn't stand the empty spot on the slide, so this is a result of that. Also adds a little pop of color if you don't stay with black.
Printer: Ender 3 S1 on PEI bed
Material: E-Sun Orange PLA+
Resolution: 0.12
NozzleTemp: 200
Bedtemp:60
Infill: 100%
Time: about 4 minutes
You may need to sand a little (I didn't) but the fit was TIGHT and I did mar up one end / have to do cleanup as a result. Next time around, will sand slightly to better the insertion fitment.