Medical Walker Ski Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ski type feet to replace the caps on a walker
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 234
- Wydruki
- 0
- Wyświetlenia
- 935
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
There are others out there, but I wanted something a little different. These are easily installed and removed with a screw. My mother-in-law liked them better than the original caps. They help ride over rugs in both directions. They fit a 26mm inside diameter tube. Supports are needed and sanding required for a smooth finish. I made them last year and not sure of the infill, I would probably use at least 30. They are made for a ¼-20 nut and screw 1" long or longer. I did notice they loosened up some over time so check them over a period of time. Made from PLA, 0.2 layer.