Medical Walker Ski Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ski type feet to replace the caps on a walker
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 234
- Makes
- 0
- Views
- 935
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
There are others out there, but I wanted something a little different. These are easily installed and removed with a screw. My mother-in-law liked them better than the original caps. They help ride over rugs in both directions. They fit a 26mm inside diameter tube. Supports are needed and sanding required for a smooth finish. I made them last year and not sure of the infill, I would probably use at least 30. They are made for a ¼-20 nut and screw 1" long or longer. I did notice they loosened up some over time so check them over a period of time. Made from PLA, 0.2 layer.