Parametric Circular Device Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for the honeycomb organizer wall meant to hold circular/disc shaped items.
- Ocena
- 4,5 / 5
- Polubienia
- 58
- Pobrania
- 417
- Wydruki
- 2
- Wyświetlenia
- 3589
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this model to mount my TP-Link Deco M5 mesh wifi. I wasn't able to find any existing circular mounts that would fit the M5. This mount is fully customizable and parameterized via OpenSCAD. It can be printed with either a built in mounting pin or with a screw hole for mounting.
The provided STL should be the proper size to mount a Deco M5.
If you customize the scad file here are a few tips.
- DeviceWidth is the the diameter of object.
- I would recommend a wall thickness of at least 4 for most applications.
- If you do not wish to have a hole for cables then set CableHoleWidth to 0.
- To generate a screw hole and not a pin set PinLength to 0 and set the screw parameters.
If you use the built-in pin version, I recommend you use 80% or higher infill otherwise the pin may break off when removing from the honeycomb wall.
2024-02-22 - v3: Added a ChopBottom property to completely chop the bottom off below a certain point rather than create a cable hole. ChopBottom = 10 would chop 10mm below the center of the mount hole or 10mm below the bottom of the pin.