Parametric Circular Device Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for the honeycomb organizer wall meant to hold circular/disc shaped items.
- Rating
- 4.5 / 5
- Likes
- 58
- Downloads
- 417
- Makes
- 2
- Views
- 3,589
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this model to mount my TP-Link Deco M5 mesh wifi. I wasn't able to find any existing circular mounts that would fit the M5. This mount is fully customizable and parameterized via OpenSCAD. It can be printed with either a built in mounting pin or with a screw hole for mounting.
The provided STL should be the proper size to mount a Deco M5.
If you customize the scad file here are a few tips.
- DeviceWidth is the the diameter of object.
- I would recommend a wall thickness of at least 4 for most applications.
- If you do not wish to have a hole for cables then set CableHoleWidth to 0.
- To generate a screw hole and not a pin set PinLength to 0 and set the screw parameters.
If you use the built-in pin version, I recommend you use 80% or higher infill otherwise the pin may break off when removing from the honeycomb wall.
2024-02-22 - v3: Added a ChopBottom property to completely chop the bottom off below a certain point rather than create a cable hole. ChopBottom = 10 would chop 10mm below the center of the mount hole or 10mm below the bottom of the pin.