Valentines Lantern for LED tea light candle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Show your love to your loved ones this Valentines Day!
- Ocena
- 4 / 5
- Polubienia
- 52
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 1421
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Taking inspiration from the Christmas Lantern from MaxT, I decided to do one for Valentines Day!
A very well calibrated printer is required as everything relies on just the first layer!
DO NOT USE REAL CANDLE (The print will melt)
This 3D print consists of:
- The base
- The inner layer
- The middle layer
- The outter layer
Filament: PLA
Nozzle: 0.4mm
Support: Not needed
Brim: Not needed
Infill: Not needed (10-15% infill for the base)
First Layer Height: 0.2mm
Print the model with the text oriented down so that the layer facing outside is smooth like the bed. Example below:
In order to keep print from being warped when removing from the bed, let the print cool down before removing with the scraper/spatula
LED TEA CANDLE was used
From Amazon: https://www.amazon.ca/Flameless-Tea-Lights/s?k=Flameless+Tea+Lights
Assembly
- Slot the tabs into the slits on the other end of the inner layer together to make a ring
- Place the inner layer ring onto the base
- Repeat steps 1-2 for the middle layer, and the outer layer.
- Place LED tea light into the center
Enjoy and have a Happy Valentines Day!