Valentines Lantern for LED tea light candle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Show your love to your loved ones this Valentines Day!
- Rating
- 4 / 5
- Likes
- 52
- Downloads
- 88
- Makes
- 1
- Views
- 1,421
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Taking inspiration from the Christmas Lantern from MaxT, I decided to do one for Valentines Day!
A very well calibrated printer is required as everything relies on just the first layer!
DO NOT USE REAL CANDLE (The print will melt)
This 3D print consists of:
- The base
- The inner layer
- The middle layer
- The outter layer
Filament: PLA
Nozzle: 0.4mm
Support: Not needed
Brim: Not needed
Infill: Not needed (10-15% infill for the base)
First Layer Height: 0.2mm
Print the model with the text oriented down so that the layer facing outside is smooth like the bed. Example below:
In order to keep print from being warped when removing from the bed, let the print cool down before removing with the scraper/spatula
LED TEA CANDLE was used
From Amazon: https://www.amazon.ca/Flameless-Tea-Lights/s?k=Flameless+Tea+Lights
Assembly
- Slot the tabs into the slits on the other end of the inner layer together to make a ring
- Place the inner layer ring onto the base
- Repeat steps 1-2 for the middle layer, and the outer layer.
- Place LED tea light into the center
Enjoy and have a Happy Valentines Day!