Foam Board Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this stand to hold your standard thickness 3/16" or 5mm foam board for displays, privacy screens, and more...
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 170
- Wydruki
- 0
- Wyświetlenia
- 1058
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Show off that display you've created, stand up your presentations, or create a barrier free of prying eyes with this simple yet effective standoff for your standard 3/16" or 5mm foamboard that you can find anywhere. Each stand has a small pillar in the middle that will embed itself into the board's center foam (version without the pillar available) and will hug the corners to keep the board securely in place. Please note that this stand will fit tightly onto the edges of your board, so make sure to squeeze them in.
Print Instructions
- Supports not required
- Print at 10-20% infill
- You can scale for thicker/thinner foam board
- The pillar is a small piece and may not print the same as on my printer, so if using a thicker nozzle it is preferred to print the version without it